3″ DPF Back Exhaust: Performance Exhaust for Amarok 550/580 3.0LT 2016+

$1,990.00 AUD

DPF Back Exhaust for Amarok 550/580 3.0L

Upgrade your Volkswagen Amarok 3.0L V6 with a Torqit DPF Back Performance Exhaust, engineered from 304 grade stainless steel for improved exhaust flow, a deeper exhaust note and durable performance.

 

Product may vary slightly from image shown.

more
Find a dealer BUY IN-STORE
NEAR YOU
Find a
dealer

3.5″ DPF Back Exhaust for Volkswagen 550/580 3.0LT Amarok: 2016…

Designed for maximising your power and torque, the DPF back 3.5” exhaust for the Volkswagen Amarok V6 550/580 is one of the most thick and durable mandrel bent systems of its kind in Australia. Tried and tested in the toughest of Australian conditions, it is manufactured from 304 grade stainless steel and is up to 2mm thick to prevent cracking when traversing rough terrain. The three-bolt laser cut flanges are manufactured from 304 grade steel, and are welded inside and out for extra strength to withstand heavy duty off-roading, touring and towing. The brushed stainless steel not only looks great, its thickness adds depth and rumble to the note. This system comes complete with a resonator to further enhance the sound output of your vehicle.

Torqit’s 3.5″ inch DPF back exhaust bolts onto the back of the DPF and complies with all regulations and insurance requirements, so your vehicle warranty will remain intact. As the owner of a vehicle fitted with a DPF, you are probably aware there are few things which will damage a diesel engine faster than excessive Exhaust Gas Temperature’s (EGT’s). The Torqit DPF Back Performance Exhaust aims to lower these EGT’s by improving the flow of gases, and increasing engine efficiency and fuel economy.

Made with thick 304-grade steel and heavy-duty brackets, this exhaust is built tough and built to last. High flow componentry helps reduce backpressure and exhaust gas temperatures (EGTs),  helping your 4WD ‘breathe’ better and improve its efficiency.

The exhaust bolts directly to the DPF, so your vehicle warranty stays intact. It’s a no-brainer for boosting your 4WD’s performance without the legal ramifications of a DPF delete. Backed by up to a 10-year warranty on all stainless-steel exhausts for diesel engines (unless otherwise stated in the vehicle-specific listing) and an extensive dealer network to support you Australia-wide.

This is a manufactured item. While key components may be kept in stock, final assembly and coating are completed to order and may require additional time before dispatch.

More About This Exhaust...

Thick Stainless Steel
Torqit uses steel up to 2mm thick. This thickness keeps your exhaust structurally sound after bending and produces a deep note without cabin drone. Regardless of where you drive, thick stainless steel gives you peace of mind against cracking and denting.

304 Grade Stainless Steel
The high amount of chromium and nickel in 304-grade steel increases its strength and rust resistance. Whether driving off-road or through water, this heavy-duty steel means maximum durability and a long lifespan. Bonus- all you need is some Scotch Brite to keep it looking new. Learn more about the difference between 304, 409 and other steel grades here.

Internal & External Welds
Internal and external welds on all our flanges reduce structural fatigue on the joints, stop cracks from forming, and prevent exhaust gas leaks. Each exhaust is TIG welded for maximum strength. TIG welding is complex and more time-consuming than the usual MIG welding technique used on exhausts; however produces a precise, clean finish with no welding spatter.

Mandrel Bent System
Torqit’s Mandrel Bender uses a flexible rod to support the exhaust internally and prevent crinkling as it’s bent. The result is a smooth, even diameter that lets exhaust gases flow unrestricted. This improves both your 4WDs’ performance and efficiency. Check out Torqit’s CNC Bender in action.

Exhaust Installation

Torqit exhausts are a bolt-together design and include a complete fitment kit and instructions. Install from your driveway, or find your closest Torqit dealer here.

If you need extra guidance, click on the instructions tab and download a copy of our Performance Exhaust Troubleshooting Guide.

Exhaust Key Features

  • Premium 304-grade stainless steel
  • Fully mandrel bent system
  • Thick brushed stainless steel
  • TIG welded
  • Laser-cut flanges welded internally and externally
  • Heavy duty brackets
  • Deep exhaust note without cabin drone
  • Bolt-together install
  • Backed by up to a 10-year warranty on all stainless-steel exhausts for diesel engines (unless otherwise stated in the vehicle-specific listing)

* Please consider aftermarket accessories such as long-range fuel tanks and suspension upgrades before ordering your exhaust. To confirm your 4WD is compatible, contact us via our chat function or on 1300 992 195.

Weight 35 kg
Make

Volkswagen

Model

Amarok

Series

550/580 3.0L

SKU

HS8156SS

Looking for extra guidance when fitting your exhaust? For tips and answers to FAQs, download a copy of our Performance Exhaust Troubleshooting Guide.